The "520 FATAL CODE: 0xF1" error on an Epson Workforce printer usually indicates a hardware-related issue, often caused by a paper jam, carriage obstruction, or internal mechanical failure. This error prevents the printer from functioning properly and typically requires troubleshooting.
Possible Causes & Solutions:
Check for Paper Jams
- Turn off the printer and unplug it.
- Open the printer cover and look for any jammed paper or foreign objects inside.
- Remove any debris carefully and restart the printer.
Inspect the Print Head Carriage
- If the print head is stuck, gently move it to the center and remove any obstructions.
- Do not force it if it doesn't move freely.
Reset the Printer
- Turn off the printer, unplug it for 5-10 minutes, then plug it back in and turn it on.
- Try printing again to see if the error persists.
Reinstall Printer Drivers
- Corrupt drivers can sometimes trigger error codes.
- Uninstall and reinstall the latest drivers from the Epson official website.
Contact Epson Support
- If the error remains after troubleshooting, it may indicate a hardware failure that requires professional repair.
