How to Reset Canon Pixma Mp150 Mp160 Mp170 Mp180 Mp450 and Mp460 Using Mptool Software

Besides service tool, mptool is the popularness software to reset printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460. Excess of software that is the program measure of small and amenity of usage. Ability of the software that is to reset level black and color cartridge at canon pixma mp series. And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.

Reset Ink Counter.

Reset ink counter that is resetting ink level (ink metrer) cartridge at printer.

• Reset Black – reset level black ink cartridge.
• Reset Color – reset level colour ink cartridge.
  

Reset waste ink counter

To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :

• Reset Main (main).
• Reset Platen (additional).
  

Download MPTool Software support for Canon MP150, MP160, MP170, MP180, MP450, MP460

Read More

Reset Ink Level Printer Canon Pixma iP1800 Using iPtool

I get this tutorial from forum http://www.fixyourownprinter.com solve the ink level error in canon Pixma iP1800/Canon Pixma iP1880. Problem in the canon cartridges after refillled, the ink level never reset from the original empty status and you can’t print at all since the ink level are reporting that the cartridges are totally empty.

If you have the like that, try this to solve the problem.

1. Press power button while plug in the powerchord – green lamp.
2. While hold the power button press resume button twice – orange blink and return to green.
3. Release the power button, Then the pc will recognize new printer install.
4. Then run the iptools from software
5. Click the reset black reset color
6. Click the reset main and reset platen. You will see in the iptol menu that the ink level will be reseted and the WP and WM will set to 0 and new cartridege installed. then exit
7. Restart the printer
   

If the problem still occured, do the same procedures from 1 to 3 then.

• Click the eeprom reset botton
• Wait for for a second the menu will be resetted and the printer will initialized.
• Turn off the printer then turn on and try to print..
  

by the way i recognize the printer that if u park the head of printer in the replace ink area position, there will be a blinking error u will notice after a few print or after used you need to reset the eeprom in iptools.

Read More

Waste ink Counter Reset For Canon Printer

Canon GENERIC "S" SERIES RESET CODE

(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

Read More

Brother MFC 7420 Reset Drum Count

Open front cover.
Press Options.
Replace Drum 1. Yes 2. No
To confirm you are installing a new drum, press 1.
When the LCD shows (Accepted), close the front cover.

Read More

Waste Ink Counter Reset

Canon GENERIC "S" SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

Read More

Epson Stylus Pro 4000 Waste Ink Counter Reset

Epson Stylus Pro 4000 Waste Ink Counter Reset

* While Powering up the printer, hold down the the left arrow, down arrow,
and Up arrow buttons
* You will get a “Self Testing” message.
* Use the Up Arrow button to select the “Clear Counters” menu.
* Press the right arrow button (the Menu button).
* Scroll through with the up/down arrows to select “Maint Tank”
* Select with the right arrow and execute with the right arrow
* Turn your printer off then turn it back on.

Read More

LaserJet P2015 Cold reset

Turn printer off
Hold down Go/green button
Turn printer on
Continue to hold the Go/green button down for at least 5 seconds, no more than
15 seconds. When the Attention light goes on, you can let go.
If at first you don’t succeed, try again, holding for a wee bit more or less time
Alternate network reset
Turn printer off

Hold down Go/green and Cancel/red buttons simultaneously
Turn printer on
Continue to hold buttons down for at least 10 seconds, but no more than 20
seconds. When the Attention/triangle light goes on, let go.
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press Go/green button for 5
seconds
If at first you don’t succeed, try again, holding for a wee bit more or less time

Read More

LaserJet 2100 Cold reset

Turn printer off
Hold Job Cancel button
Turn printer on
When all LEDS light, release button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press and release Go and Job
Cancel buttons simultaneously

Read More

Reset Protection Counter All Epson Printer

1. Open SSC Service Utility
2. Equalize configuraton of ssc with configuraton of printer.
3. Right Click SSC icon in the taskbar
4. Select Protection counter
5. Choose Reset counter protection
6. Confirmation
7. Done

Read More